| Mandatory Units |
Title |
|
| 001 |
Mechanical fix board to ceilings |
117-GCA |
| 002 |
Set angle beads using 3 point rule |
117-GCA |
| 003 |
Applying Scrim and 2 coats of
plaster to ceiling |
117-GCA |
| 004 |
Applying scratch coats of
sand/cement render to walls |
117-GCA |
| 005 |
Applying Float coats of render to
walls using screeds and bays, free rule and beaded
walls, attached piers/chimney breasts |
117-GCA |
| 007 |
preparing walls and applying 2 coats
of finish to floated walls |
117-GCA |
| 009 |
carrying out repairs to already
plastered ceilings and walls |
117-GCA |
| 011 |
Re Plaster (finish) 2 coat existing
ceilings using bonding agent |
117-GCA |
| 010 |
Re Plaster (Backing plaster)
existing walls using mechanical key and bonding
agent |
117-GCA |
| 006 |
Direct Bond plasterboards to walls |
120-GCA |
| 008 |
scrim and 2 coat skim plasterboard
walls |
117-GCA |
| 012 |
Apply cove materials with
internal/external and offset angles |
117-GCA |
| 013 |
Screeding a sand and cement floor from a
given level or datum |
119-GCA |
| Optional Units |
| A000 |
Applying 4 textured finishes with border |
116-GCAA |
| A003 |
3 coat finish ceiling using bonding
agent over heavy texture |
116-GCAA |
| A002 |
2 coat finish curved barrel ceiling |
116-GCAA |
| A001 |
Construct archways and plaster
finish |
116-GCAA |
| E001 |
Applying a 2 coat Flat render finish
with wooden or poly float |
EGCA118 |
| E002 |
Applying Pebbledash finish using
natural stone and spars |
EGCA118 |
| E003 |
Applying Tyrolean finish with hand
machine also compressor |
EGCA118 |
| E004 |
Applying Bellcast beads |
EGCA118 |
| E005 |
Free forming external angles no
beads |
EGCA118 |
| E006 |
Forming ashlar blocks |
EGCA118 |
| E007 |
Creating Panel work and Pargetting
to external walls |
EGCA118 |
| F001 |
Design
and make Running mould |
FGCA121 |
| F002 |
Fibrous
Bench Run mould |
FGCA121 |
| F003 |
Fibrous
InSitu Run Mould |
FGCA121 |
| F004 |
Fibrous
flood casting |
FGCA121 |
| F005 |
Fibrous
case mould casting |
FGCA121 |
| F006 |
Fibrous
Bench spun mould |
FGCA121 |
| F007 |
Fibrous
Reverse mould |
FGCA121 |
| F008 |
Fibrous
Fix and stop in |
FGCA121 |
| V01 |
Apply Venetian Plaster base plus top
coats and polish to finish |
VGCAV01 |